Maxtor 5t040h4 firmware updating

Rated 4.19/5 based on 845 customer reviews

You might need to clear out any temp directories if they exist: - C:\WINNT\Temp - %TEMP% Also if you backed up your current system files before the Win2k SP4 install, you can probably remove them if you really need the space. Latest file from trying to format a Fiji DVD RW disk (same error with Sony disk) after SP4 update: 05e8 :16 e=0. Driver : Sparrow Description : Adaptec AIC-6x60 series SCSI miniport Version : v2.0a Company : Adaptec, Inc.

This sort of line is usually emitted by another part of the kernel that trapped something bad.ivtv-firmware-20070217-1plf2007.1 should be the correct firmware. The PVR-250 works but I get 0 byte files from the PVR-150. ivtv: Start initialization, version 1.3.0 ivtv0: Initializing card #0 ivtv0: Autodetected Hauppauge card (cx23416 based) ivtv0: Unreasonably low latency timer, setting to 64 (was 32) ivtv0: Autodetected Hauppauge Win TV PVR-150 ivtv0: Reopen i2c bus for IR-blaster support cx25840 0-0044: cx25843-24 found @ 0x88 (ivtv i2c driver #0) tuner 0-0061: chip found @ 0xc2 (ivtv i2c driver #0) wm8775 0-001b: chip found @ 0x36 (ivtv i2c driver #0) ivtv0: Registered device video0 for encoder MPG (4096 k B) ivtv0: Registered device video32 for encoder YUV (2048 k B) ivtv0: Registered device vbi0 for encoder VBI (1024 k B) ivtv0: Registered device video24 for encoder PCM (320 k B) ivtv0: Initialized card #0: Hauppauge Win TV PVR-150 ivtv1: Initializing card #1 ivtv1: Autodetected Hauppauge card (cx23416 based) ivtv1: Unreasonably low latency timer, setting to 64 (was 32) ivtv1: Autodetected Hauppauge Win TV PVR-250 saa7115 1-0021: saa7115 found (1f7115d0e100000) @ 0x42 (ivtv i2c driver #1) msp3400 1-0040: MSP3435G-B6 found @ 0x80 (ivtv i2c driver #1) tuner 1-0061: chip found @ 0xc2 (ivtv i2c driver #1) ivtv1: Registered device video1 for encoder MPG (4096 k B) ivtv1: Registered device video33 for encoder YUV (2048 k B) ivtv1: Registered device vbi1 for encoder VBI (1024 k B) ivtv1: Registered device video25 for encoder PCM (320 k B) ivtv1: Initialized card #1: Hauppauge Win TV PVR-250 ivtv: End initialization ivtv0: Loaded v4l-cx2341firmware (376836 bytes) ivtv0: Encoder revision: 0x02060039 [] (ivtv_irq_handler 0x0/0x12f0 [ivtv]) ivtv1: Loaded v4l-cx2341firmware (376836 bytes) ivtv1: Encoder revision: 0x02060039 [[email protected] ~]$ rpm -qa | grep ivtv ivtv-firmware-20070217-1plf2007.1 perl-Video-ivtv-0.13-3mdv2008.1 ivtv-0.10-0.10.2-3mdv2008.1 _______________________________________________ ivtv-users mailing list [email protected] As for what firmware to use, maybe you can look in this directory: The readme file may help.It says all the firmware files you would need are in: (I only have a PVR-150MCE myself and I used the firmware that came with the Windows driver.) Regards, Andy _______________________________________________ ivtv-users mailing list [email protected] Well Andy, I downloaded and extracted the tarball & compared the extracted firmware files to the firmware in /lib/firmware/ and they are a match. i can rip to hard drive w/ dvd shrink but when it comes time to burn i get the following nero log.********** Nero Recode 2 ********** Version: 2.2.6.17 Cecil the Diesel Nero Serial Removed Project type: Main Movie to DVD Target size: DVD5 (2282925) File Lang Stream Patcher.cpp, Line 56 Command table patching started...

Leave a Reply